Seller:
- BUSCH VACUUM PUMP & SYSTEM in INDONESIA
Vacuum Products
Vacuum Pumps
R 5 Series
Oil Recirculating
Huckepack
Once-Through-Sealing
Dolphin
Liquid Ring
COBRA
Dry Screw
Mink Pressure or Vacuum,
Dry Claw
Merlin Pressure/ Vacuum
Dry Claw
Seco
Dry Vane
Vacuum Systems Other Products
Medical Systems
Standard Vacuum Systems
Custom Vacuum Systems
Other Systems
Panda
Rotary Lobe Booster
Samos SB
Regenerative Blower
Panther
Rotary Lobe Blower
Phenix
Dry Waste Collection
Vacuum Accessories
Busch Lubricants and
Maintenance Items
- BECKER VACUUM PUMPS and BLOWERS in INDONESIA
Vacuum pumps
Rotary vane pumps, oil-free
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs. These vacuum pumps operate ...
Rotary vane vacuum pumps, oil-lubricated
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs. The vanes are ...
Screw vacuum pumps
Driven directly by an integrated frequency inverter, these pumps no longer require any drive transmission. The area in which the units work is 100% oil-free. The integrated speed ...
Side channel vacuum pumps
Using "multi-stage" compression, side channel vacuum pumps generate low-pulsation suction air. Perfected impeller design with curved blades guarantees Optimum efficiency. ...
Radial vacuum pumps
Radial vacuum pumps achieve high delivery volumes with very little pulsation. The frequency inverter integrated on the motor provides the capability of matching volumetric flow ...
- ADIXEN ALCATEL HIGH VACUUM PUMP and LEAK DETECTOR in INDONESIA
Vacuum Technology
* Roughing Pumps
* Roots Pumping Systems
* High Vacuum Pumps and Pumping Systems
* Process monitoring sensors
* Measurement, Valves, Flanges and Fittings
Leak detectors
* Helium leak detectors
* Hydrogen leak detectors
* Refrigerant leak detectors
Zoom :
PASCAL Series
PASCAL Series
Specific solutions for all major key applicationsFrom 2 to 100 m3/ h (1.4 to 85 cfm) : The best way to meet your requirementsPASCAL series rotary vane pumps can meet the requirements...
Click to see more...
ATH Series
ATH Series
A complete range of hybrid turbomolecular pumpsThe Adixen ATH series offers a complete range of hybrid turbomolecular pumps from 30 to 300l/ s.• ATH 31• ATH 200• ATH...
Click to see more...
Zoom :
ASM 310
ASM 310
The ideal combination of performance and portability for mobile useThe Adixen ASM 310 is the long time awaited unit for maintenance technicians and engineers. This unit accommodates two tracer gases, ...
Click to see more...
H2000 PLUS
H2000 PLUS
Industrial Leak Detector H2000 PLUSHydrogen Leak Detector H2000 PLUS is the ultimate tool for leak detection and leak locating using diluted hydrogen as tracer gas, finding...
Click to see more...
- WATSON MARLOW BREDEL PERISTALTIC HOSE PUMP in INDONESIA
Tube pumps and hose pumps for transfer, metering and filling
Peristaltic, Hose, Tube Pumps
Peristaltic, Hose, Tube Pumps
Select a region
United Kingdom
Dansk
Deutschland
Italia
Nederland
Português/ Brasil
Rest of Asia
Russia
South Africa and Africa
Sverige
Sverige Alitea
Switzerland
The Perfect Pump
Watson-Marlow Bredel is the world leader in peristaltic hose pumps, tube pumps, and filling systems. We have over one million hose and tube pumps metering, transferring and dispensing shear sensitive, abrasive and aggressive fluids in every industry such as:
* Pharmaceutical and Biotech
* Aseptic filling
* Chemical
* Waste/ water treatment
* OEM
* Mining
* Pulp and Paper
* Ceramics
* Food and beverage
* Paints and pigments
* Print and packaging
If you handle fluids - sensitive or abrasive, sterile or contaminating - get Watson-Marlow Bredel pumps working for you ...more
Simplify your validation with a Flexicon aseptic peristaltic filling systems for the pharmaceutical, bio-tech and diagnostic industry ...more
Watson-Marlow has launched three new NEMA 4X rated cased peristaltic pumps with certified PROFIBUS DP networking capabilities, namely the 520Bp, 620Bp and 720Bp ...more
Increase your process reliability by using a Watson-Marlow tubing pump with a five-year warranty ...more
Significantly reduce your operating and maintenance costs with a Watson-Marlow Bredel sealless hose pump ...more
More from Watson-Marlow...
Peristaltic, Hose, Tube Pumps
* Industrial pumps
* Biopharm/ Food pumps
* Flexicon Fillers
* Water & Waste pumps
* Aseptic filling/ capping
* OEM pumps
* Laboratory pumps
* Applications center
* Tubing and hoses
* How they work
* Competition
* New in July
* Trade shows
* Brochures and manuals
* Career openings
* Corporate information
* Hose Pumps
* Tubing Pumps
* Contact us
On-line help
Go to Tubing
Site map |Career openings |Tr
- ARO INGERSOLL RAND AIR OPERATED DOUBLE DIAPHRAGM PUMPS in INDONESIA
*
* Expert Series Pumps (EXP) 1”, 1½”, 2” & 3” ports
* Pro Series Pumps 1”, 1½”, 2” & 3” ports
* Specialty Application Pumps
Ingersoll Rand / ARO Diaphragm Pumps provide stall-free, ice-free operation. Their patented “Unstallable” unbalanced air valve design avoids stalling issues associated with other pumps. The “Quick-Dump” exhaust valves divert cold exhaust air from ice-prone components, preventing freezing. Backed by a five-year warranty, we have the most reliable pump line on the market today.
Compact Pumps 1/ 4", 3/ 8", 1/ 2" & 3/ 4" ports
1/ 4" Non-Metallic | 3/ 8" Non-Metallic | 1/ 2" Non-Metallic | 1/ 2" Metallic | 3/ 4" Non-Metallic | 3/ 4" Metallic | 1/ 2" Classic Style Non-Metallic
Ideal for OEM and General Industrial applications where peak performance, endurance, and reliability are a must, our compact pumps feature big performance in a small package. With flow rates up to 14.8 GPM (56 LPM) and a large range of material and porting configurations, we have the right pump for your application.
Expert Series Pumps (EXP) 1”, 1½”, 2” & 3” ports
1" EXP Non-Metallic | 1" EXP Metallic | 1½” EXP Non-Metallic | 1½” EXP Metallic | 2" EXP Non-Metallic | 2" EXP Metallic | 3" EXP Metallic | EXP Tech Video
ARO's PROCESS GRADE, Expert Series Diaphragm Pumps feature the best total cost of ownership of any diaphragm pump on the market. A favorite among process professionals, the EXP Pump family provides optimum energy efficiency and downtime solutions. With flow rates up to 275 GPM (1041 LPM) and a large range of material and porting configurations, ARO has the right pump for your application.
Pro Series Pumps 1”, 1½”, 2” & 3” ports
1" Pro Series Non-Metallic | 1" Pro Series Metallic | 1½” Pro Series Non-Metallic | 1½” Pro Series Metallic | 2" Pro Series Non-Metallic | 2" Pro Series Metallic | 3" Pro Series Metallic | Pro Series Product Tour
ARO's INDUSTRIAL GRADE, Pro-Series Diaphragm Pumps provide high performance and stall-free reliability. With flow rates up to 237 GPM (897 LPM) and a large range of material and porting configurations, we have the right pump to match your application needs.
Specialty Application Pumps
Flex-CheckTM3/ 8" Pumps | Pit BossTM 1½" Dewatering and Solids-Handling Pump | Pit BossTM 2" Dewatering and Solids-Handling Pump | Pit BossTM 3" Dewatering and Solids-Handling Pump | Drum Package -- Basic | Drum Package -- Dispense | Drum Package -- Transfer | 1" Ported Conductive Pumps | 1½" Ported Conductive Pumps | 2" Ported Conductive Pump | Flap Valve | 2" Ported Powder Transfer | 3" Ported Powder Transfer | 2:1 Ratio High Pressure Pump | 3:1 Ratio High Pressure Pump | 1/ 2" Ported Sanitary Transfer | 1" Ported Sanitary Transfer | 1½" Ported Sanitary Transfer | 2" Ported Sanitary Transfer | 3" Ported Sanitary Transfer | PW Series | Centrifugal Dewatering Pump | Centrifugal Dewatering Pump | 1/ 2" Ported Natural Gas | 1" Ported Natural Gas | 1/ 2" U.L. Fuel Transfer Pump | 1" U.L. Fuel Transfer Pump | 1½" U.L. Fuel Transfer Pump | 2" U.L. Fuel Transfer Pump
Utilizing technology identical to other ARO Pumps, these Specialty models will provide the same high level of performance and satisfaction but in a design tailored for your specific application. Specialty pumps include: Drum Packages, Flap Valve pumps, Powder Transfer pumps, High Pressure pumps, Sanitary Transfer pumps, Natural Gas Operated pumps, Centrifugal De-watering pumps, and Fuel Pumps.
© 2009 Ingersoll-Rand Company, All rights reserved.
- ULTRA TURRAX HIGH SHEAR MIXER in INDONESIA
IKA® WORKS offers the most comprehensive line of high shear mixers, blenders and mixing systems in the industry.. Our product line includes batch and inline mixers, from laboratory to production scale. IKA® mixers are used for thousands of applications in the food, chemical, personal care and pharmaceutical industries. Select one of the links below to find out how an IKA® mixer can improve your product, and increase your production capacity.
In Line Mixers
IKA® offers the most versatile inline mixers in the industry, including a laboratory mixer that can be easily converted to any of six different mixer types. IKA®’s inline mixers utilize a modular design, making them extremely versatile. Mixers are available in single and multiple stage arrangements, where up to three mixing tools are arranged in series. All IKA® mixers have the capability of interchanging the mixing tools, so that the mixer can be modified to suit the application requirements. In addition, IKA®inline mixers maintain a consistent tip speed, no matter what the size, making them the most scalable mixers in the industry. Inline mixers:
Single Stage
UTL - Ultra Turrax™ is a high shear mixer offering 5 mixing tool options, and flow rates up to 1500+ gpm.
HED - High Energy Disperser is a moderate shear, self pumping mixer offering 3 mixing tool options, and flow rates to 350 gpm.
SP - Shear Pump is an economy shear pump offering up to 2 mixing tool options, and flow rates up to 120 gpm.
Multiple Stage
DR - Dispax Reactor™ is a high shear mixer offering 5 mixing tool options and up to three stages, with flow rates up to 550+ gpm.
DRS – Super Dispax Reactor™ is an ultra high shear mixer with 3 mixing tool options and up to three stages, with flow rates up to 175+ gpm.
Powder-Liquid Mixers
IKA® introduced the revolutionary MHD Powder-Liquid Mixer only a few years ago, and already this patented machine has received an award for its innovative design. The IKA® MHD is the only powder-liquid mixer that uses a mechanical feed method to draw in the solids, which reduces aeration. Other powder-liquid mixers rely on the venturi principle, or vacuum effect, caused by the fluid traveling at high velocity. In addition, highly viscous fluids and high concentrations are not a problem with the MHD. IKA® also offers the CMS for general purpose, powder-liquid applications. The CMS can incorporate high volumes of solids and quickly disperse them.
MHD – Powder-Liquid Mixer, mechanical feed is a high shear mixer offering up to 8 mixing tool options and 4 auger choices, with flow rates to 175+ gpm.
CMS – Powder-Liquid Mixer, vacuum feed is a high shear mixer that produces a large vacuum to quickly incorporate large quantities of solids, with flow rates to 900+ gpm.
Batch Mixers
IKA® offers a wide variety of batch mixers, including high shear mixers, agitators, stirrers and jet mixers. IKA® also offers several laboratory mixers for use in the laboratory or pilot plant. A wide variety of mixing tools is available on our batch mixers, and other options are available for sealing and mounting. Batch mixers:
Top Entry:
UTC - Ultra Turrax™ with shaft-in-tube design: is a high shear mixer offering 5 mixing tool options, and mixing volumes to 1, 500 gallons.
UTS - Ultra Turrax™ with rod support design: is a high shear mixer with capacities to 150 gallons.
RT - Rototron Jet Mixer: is a medium shear with a propeller mixer housed by a jet-flow tube, with capacities to 8, 000 gallons.
RK and RF – Turbotron™ Agitator: is a conventional mixer providing low shear with capacities to 3, 000 gallons.
RKG and RFG – Turbotron™ Anchor Stirrer: anchor stirrer with optional side wall scrapers with capacities to 5, 000 gallons.
Bottom or Side Entry:
UTE - Ultra Turrax for bottom or side mounting: is a high shear mixer offering 3 mixing tool options, and mixing volumes to 1, 000 gallons.
Stands:
SF – Mobile Stand: offered with manual or automatic hydraulic, available in carbon steel or stainless steel.
SB – Floor Mount Stand: offered with manual or automatic hydraulic, available in carbon steel or stainless steel.
SW – Wall Mount Stand: offered with manual or automatic hydraulic, available in carbon steel or stainless steel.
Colloid & Cone Mills
The Colloid Mill MK is suitable for very fine emulsions and suspensions. The MK utilizes a three stage, rotor and stator, with an infinitely adjustable gap which allows the milling action to be optimized according to the application. The three stages have reversing grooves with increasingly fine serrations, that result in a uniform product. The Cone Mill MKO is a unique IKA® innovation that utilizes a three stage, rotor and stator which are surfaced with an extremely hard and abrasive surface coating. The MKO provides an even finer and more intense milling action than a colloid mill. IKA® mills:
MK – Colloid Mill: has an adjustable gap rotor and stator with three stages, and serrated teeth, capacities to 350+ gpm.
MKO – Cone Mill: has an adjustable gap rotor and stator with three stages, and abrasive coating, capacities to 25+ gpm.
Laboratory Mixers
IKA® offers laboratory mixers for inline and batch processes. Our versatile and innovative designs are unparalleled in quality and functionality. Every IKA® laboratory mixer offers a wide variety of mixing tool options and accessories. Scale-up to production from the laboratory is achieved through consistent tip speeds and mixing tool geometries. Inline laboratory mixers can be equipped with a re-circulation loop and a vessel for simulating a batch or semi-continuous systems. Other accessories include a speed controller, dosing pumps, solids feeders and more. Batch mixers have an optional attachment that converts them into an inline mixer, and a wide variety of mixing tool options. Inline and batch mixers:
Laboratory Mixers for Inline:
Labor-Pilot™: is an inline mixer with a pressure rating of 50 psi, and a nominal flow rate of 1.5 gpm. It has a modular design that allows it to be fitted with six different types of mixer heads, and each mixer type has as many as four different mixing tool options. It is the most versatile laboratory mixer on the market.
Process-Pilot™: has the same flexibility as the Labor-PilotTM, but with one more additional mixing head option, and it has a maximum pressure rating of 230 psi.
Laboratory Mixers for Batch:
T50 Ultra TurraxTM: is a high performance disperser for volumes to 8 gallons (30 liters), has a 700 Watt motor, 12 mixing tools are available.
T25 Ultra TurraxTM: is a high performance disperser for volumes to 0.7 gallons (2.5 liters), has a 500 Watt motor, 15 mixing tools are available.
Other mixers for smaller volumes are available from IKA®, visit or Laboratory Division website at www.IKA.net
The MS 450 Swirler is the solution for the mixing of lyophilized powder with Sterile Water for Injection (SWFI). The IKA Works MS 450 Swirler has been designed to run at a specific speed for the optimized mixing requirement of lyophilized powder. The MS 450 has been tested and is proven to be the perfect unit for doing this operation hands free. The MS 450 can gently swirl up to 8 vials at one time.
Systems & Plants
With over 50 years of experience in mixing and blending systems, IKA® offers unparalleled experience in the design and construction of turnkey systems and plants for mixing and blending. Our knowledgeable group of sales and design engineers can custom design a system that will meet the exact requirements of the process. We have built Inline systems and plants for batch processes, for every industry, including chemical, food, pharmaceutical. Systems and Plants:
Continuouse | Batch | Dilustion Plants| Master Plant
Systems for Inline Processes: continuous mixing systems that incorporate high quality IKA® mixers and blenders. The systems can be designed to meter, dispense, mix and transfer all in one turnkey package. Electronic controls can be simple, manual type of operation, or very sophisticated designs with automatic controls and graphical interfaces. IKA® has many standard designs that can be adapted to the application, or can design a totally custom system according to the customer’s requirements. Dilution plants, foaming systems, fuel blending systems, powder-liquid mixing plants and edible oil systems are just a few of the turnkey packages that IKA® has designed and built for our customers.
Plants for Batch Processes: plants in any size can be custom designed, or selected from our standard offering from 5 to over 500 gallons. IKA® mixers and blenders are combined with quality vessels, and auxiliary equipment to provide a complete turnkey plant.
Dilution Plants DPV: in order to reduce transportation costs, many materials are supplied in a highly concentrated form that requires dilution prior to use. A continuous mixing system is required that can take two or more streams of material and instantly disperse the materials into a uniform product, without re-circulation. IKA® designs and manufacturers systems for this purpose, and has a complete line of standard systems that are customized to the application. IKA® DPV Dilution Plants include pumps, flow meters, mixers, controls, and everything needed for a complete turnkey system.
Master Plant :The new, pioneer mixing concept of the Master Plant guarantees for highest product quality and extreme shortening of production times. The heart of the plant is the dispersing machine DBI 2000/ .. directly mounted to the vessel. The machine has a two stage design which, contrary to usual systems, does not force you to make compromises.
Kneaders
IKA® is a leading manufacturer of heavy-duty kneaders and kneading systems. Used in the chemical, food and defense industries, IKA® kneaders are known for their quality and efficiency.
IKA® DUPLEX™ and ZETA™ Horizontal Kneaders: are heavy-duty kneading machines for extremely high viscosities. The patented kneading blades can save up to 30% kneading time compared to Z-kneaders.
IKA® PLANETRONTM Vertical Kneaders: are used when highly viscous materials must be intensively, and absolutely free of contamination.
IKA® CONTERNA™ Continuous Kneaders: this patented kneader was developed over a decade ago, and can significantly reduce operating costs and manpower requirements in heavy-duty kneading processes.
- WIGGEN HAUSER HIGH SHEAR HOMOGENIZER MIXER in INDONESIA
Lab Range Batch Dispersers
The EkoMix Laboratory High Shear Mixer The Standard Multimix High Shear Mixer
The Heavy Duty Multimix High Shear Mixer The Explosion Proof Heavy Duty Multimix High Shear Mixer
The Multimix Basket Mill HSM 2105 BKM The Vacuum Heavy Duty Multimix High Shear Mixer
Industrial Range Batch Dispersers
The Industrial Multimix High Shear Mixers The High Speed Disperser / Dissolver
Inline Machines
The Inline Laboratory and Pilot Plant The Industrial Inline High Shear Mixers
Process Plants
The Solid Liquid Injection System - SLIS The Vacuum Inline VM and Solid Liquid Injection System - SLIS
The Heavy Duty Vacuum High Shear Mixer
Ribbon Blenders
The Vacuum Ribbon Blender
- NEW AGE INDUSTRIES SILICONE TUBING & FITTINGS in INDONESIA
PLASTIC TUBING AND HOSE - RUBBER TUBING AND HOSE - HOME PAGE
Plastic Tubing and Rubber Hose
ESOP - Employee Owned For Your Benefit
Plastic Tubing and Hose Literature
Looking for
Newage Testing
Instruments?
CLICK HERE
colored polyurethane tubing silicone tubing and hose plastic barbed fittings kwik clamps easycut hose cutter
NewAge Industries is a manufacturer and fabricator of flexible plastic tubing and hose and a supplier of fittings and clamps. We produce and stock large quantities of a wide variety of rubber and plastic tubing, plastic and rubber hose, fittings, and clamps for same day shipment. Materials that meet 3A, NSF, USP Class VI, and other requirements include PVC, silicone, fluoropolymer, TPR (thermoplastic rubber), latex, nylon, polypropylene, polyethylene, and more. Rubber tubing and plastic hose styles are available in unreinforced tubing, corrugated or convoluted tubing, and braid-reinforced hose for extra strength and pressure capabilities. See our Product pages for details and specifications.
NewAge Industries also offers an array of fittings and clamps to accompany its plastic tubing and hose. Our capabilities for custom extrusions, fabrications (coiling, heat formed shapes, tubing and hose cut to specified lengths, thermal tube bonding), and hose assemblies help make us an industry leader. See our Custom & Fabrication pages for more information.
Go to the Contact Us section to look up listings of our Technical Support Staff if you need assistance in selecting the product that's right for your application, or if you would like to place an order (see our Terms & Conditions).
Let us help you with all of your Tubing and Hose needs
NEWAGE FOOD & BEVERAGE HOSE
coils of pvc hose & tubingRubber-covered nitrile hose for food and beverage applications. For more information visit foodandbeveragehose.com or call 1-800-506-3924 (toll free, US only) or 215-526-2300.
FEATURED PRODUCT
PNEUMATIC TUBING
Polyurethane Pneumatic Tubing
silicone tubing and hosesPolyurethane tubing designed for pneumatic applications is manufactured and stocked by NewAge® Industries. Called Superthane® Pneumatic, the tubing is made from hydrolysis-resistant polyurethane to resist attack from moisture. The flexible tubing allows for tight bending in and around equipment, making it a good choice for pneumatic control, robotics, automated machinery, fluid circuitry, lubrication lines, and instrumentation applications. Read more...
- ADVANTAPURE PLATINUM CURED SILICONE TUBING
Manufacturers of Sanitary Tubing, Hose, and Sanitary Hose Assemblies
Silicone Tubing, Silicone Hose, TPE Tubing, PTFE and FEP Hose, EPDM Hose, Stainless Steel Fittings
ESOP employee owned
silicone hose, stainless steel fittings
platinum cured silicone tubing
medical grade tubing and high purity hose
WELCOME
silicone hose assembliesNewAge Industries' AdvantaPure specialize in producing platinum-cured silicone hose, platinum-cured silicone tubing, wire reinforced silicone hose, rubber covered FEP hose, stainless steel overbraided PTFE hose, wire reinforced EPDM hose, stainless steel sanitary fittings, complete sanitary hose assemblies, molded silicone assemblies, single-use manifolds, stoppers & container closures, electronic identification & tracking systems, and more.
Sanitary Hose assembliesOur mission is to become the premier company for high purity - hygienic hose and fluid flow products used in the Pharmaceutical, Biomedical, Cosmetic, and Food & Beverage industries.
Please bookmark us in your "Favorites" and periodically check back for new additions to our product line.
CURRENT FEATURED PRODUCT
BioPharmaceutical Grade TPE Tubing
silicone peristaltic pump tubing
AdvantaFlex™ BioPharmaceutical tubing is a new formulation of TPE (thermoplastic elastomer) developed specifically for the requirements of high purity fluid transfer.
AdvantaFlex biopharmaceutical tubing addresses the need for a flexible, low extractable, high purity, heat sealable, and weldable tubing for fluid processing applications. Its unique properties help it perform better than other tubing in high purity fluid lines and peristaltic pumps. READ MORE...
NEW PRODUCT SHOWCASE
GammaTag® Gamma-Radiation-Resistant RFID Tags
RFID GammaTagGammaTag RFID Tag
Introducing an addition to our line of RFID tags designed specifically for use in applications involving gamma irradiation. The new product, called GammaTag 500, is ideal for high volume items requiring repeated gamma sterilization. It handles typical doses of 25 kGy (kilograys) and a cumulative amount of at least 500 kGy with no loss of data. READ MORE...
Single-Use Process Systems
Single Use Sterile Batch Filling SystemsBy combining platinum-cured, Class VI silicone tubing with molded fittings, stoppers and other components, a wide variety of assembly options are possible to create Single Use Process Systems. Designs range from simple, single fitting connections to manifolds of complex configurations with varying lengths of tubing and several molded connections. The process used to create silicone manifolds permanently bonds silicone tubing and molded fittings into one unit. Leaks and entrapment concerns, common with the use of barbed fittings, are eliminated. READ MORE...
medical grade tubing and hose used in the pharmaceutical, biomedical, cosmetic, and food industriesBy concentrating on the Pharmaceutical, Biomedical, Cosmetic, and Food industries, AdvantaPure can address the specific needs and wants of these industries. The team of professionals assembled for this company are each the best at what they do and want to fill the needs of these very important markets. Key emphasis will be made on cleanliness, validations, and reliable delivery of product. We believe that by focusing on a smaller market segment, we can provide exceptional sanitary tubing and hose products and offer better services than anyone else in the marketplace.
- GAST VACUUM PUMP & PNEUMATIC AIR MOTORS in INDONESIA
From air motors to vacuum generators, Gast supplies the pneumatic products that leading OEMs rely upon to run their applications smoothly and efficiently.
To learn more about our products, please read the overviews below. For more detailed information on each product, just click on the product link for each.
Warranty Information
Piston: Built to withstand rugged operating conditions for high-pressure, oilless operation. Includes model numbers that start with 1-7L, 1-7H, 1-5V, PAB/ PBB/ PCA, and VAB/ VBB/ VCD.
back to top
ROC-R©: Our ROC-R rocking piston line combines piston pump durability with diaphragm pump efficiency, proven outstanding performance and flexibility. Model numbers usually start with LOA/ LAA/ ROA/ RAA/ SOA/ SAA or XR, where X is a number. back to top
Rotary Vane: Pulsation-free, minimal vibration with long service-free life for oilless or lubricated applications. Includes model numbers starting with a 4 digit numeric sequence (ie - 0323). back to top
Diaphragm: Compact, quiet source of vacuum or pressure. Miniature styles are ideally suited for a variety of light-duty applications. Model numbers usually start with DOA/ DAA/ MOA/ MAA or XD, where X is a number.
back to top
Linear: Extremely quiet, highly efficient operation and simple maintenance due to principles of electromagnetic oscillation. Model numbers start with C/ SPP/ HP.
back to top
Regenerative Blowers: For high-volume vacuum or compressed air applications. Several models are available with explosion proof motors for soil vapor extraction applications. Models numbers start with RX, where X is a number. back to top
Air & Gear motors: Rugged and reliable, a broad range of models are available in lubricated, lubricated stainless steel, and oilless styles. Model numbers start with XAM, where X is a number. back to top
Vacuum Generators: Low cost, compact alternative to traditional vacuum pumps in single and mutli-stage designs. Includes model numbers starting with VG.
back to top
Tank Units
Tanks systems that can be designed to make small pumps do big jobs are a natural extension of the Gast line.
back to top
Dry Sprinkler Systems
UL2125 Listed oilless piston air compressors for dry sprinkler systems.
back to top
|
Itrademarket Priority Listed Since 2009
